DIAG AUTO BXL · Brussels and all of Belgium
AdBlue breakdown help: no start, SCR and urea faults
"No start in … km" message, AdBlue or UREA warning light on, SCR fault: we read the faults and repair the cause, 7 days a week until 9 pm, in Brussels and anywhere in Belgium.
- We travel anywhere in Belgium
- Until 9 pm, 7 days a week
- On-site diagnostics
- All makes
- ECU/TCU reading and writing
- ECU cloning
- Engine remapping
- Coding and adaptation
- Advanced electronic diagnostics
- Mechatronic unit programming and repair
The plate is our number. Tap it to call.
Animated demo: a dashboard shows three warning lights on (AdBlue, DPF, engine) and the message “No start in 800 km”. The diagnostic tool reads three faults, then the lights go out one by one.
- We travel anywhere in Belgium
- Available until 9 pm, weekends included
- AdBlue, DPF, EGR: guaranteed solution
The faults people call us for
Recognise one of these messages? Tell us what the display says and we already know where to look.
No start in 800 km
AdBlue fault. Sensor, pump, injector or urea tank: we read the fault and fix the cause before the vehicle locks out.
Risk of particulate filter clogging
DPF full or regeneration that no longer starts. Common on vehicles driven mostly in town.
Engine fault: have the vehicle repaired
EGR valve, sensor or ECU. A full diagnosis tells which one, without swapping parts at random.
Gearbox fault
Gearbox stuck or gears that won't engage. We read and reprogram the gearbox control unit (TCU).
- The engine won't start
Van, car or truck at a standstill: we come to the vehicle, wherever it broke down.
- Locked ECU
Unlocking of latest-generation Bosch MD1 and MG1 ECUs, via the OBD port or on the bench, with Autotuner Master and KESS3 Master.
Our services
- Full diagnostics
- Reading of all ECUs and stored faults.
- ECU cloning
- Copy of the faulty engine ECU to its replacement. Bosch EDC17, MD1, MG1 and others.
- TCU cloning (mechatronics)
- Automatic gearboxes DSG 7 DQ381 (VW, Audi), ZF 8HP (BMW) and other models.
- Electronic fault finding
- Full diagnosis, repair of the root cause, then clearing of the fault codes.
- Stage 1
- Custom engine remapping: more torque, more power.
- Mercedes keys and immobiliser (up to FBS3)
- Lost or spare key, synchronisation after a control unit is replaced. Vehicle documents must be shown.
- Unlocking of secured ECUs
- Locked Bosch MD1 and MG1, via the OBD port or on the bench, with Autotuner Master and Alientech KESS3 Master.
- VAG · Bosch MG1CS002 H80 · TC298
- VAG · Bosch MG1CS008 · TC298
- VAG · Bosch MG1CS031 H80 · TC298
- VAG · Bosch MD1CS004 H80 · TC298
- VAG · Bosch MD1CS014 · TC299
- Stellantis · Bosch MD1CS003 · TC298
- Stellantis · Bosch MG1CS032 · SPC58
- Mercedes · Bosch MD1CP001 · SPC5777
- Mercedes · Bosch MG1CP002 · SPC5777
- Porsche · Bosch MG1CP007 · TC299
- Porsche · Bosch MG1CS047 · TC299
- Commercial vehicles · Bosch MD1CS069 · TC299
- Commercial vehicles · Bosch MD1CS089 · TC299
- BRP / Rotax · Bosch MG1CA920 · SPC58N
- DAF trucks · Delphi ETC3 UDS · MPC5566
- Mercedes trucks · CPC5 · SPC58
Done within 24 hours of receiving your ECU.
BOOT connection · vehicles built from 2021
Brands concerned: Audi, Bentley, Citroën, Cupra, DS, Fiat, Ford, Genesis, Opel, Peugeot, Porsche, Seat, Secma, Skoda, Toyota, Vauxhall and others

- Module cloning
- BMW and MINI FRM, Mercedes EZS/EIS, Audi steering column lock.
- Coding and configuration
- Commissioning of parts and ECUs, activation of functions.
- AdBlue / SCR repair
- Testing of the NOx sensor, pump and injector, cleaning of crystallisation, part replacement and then adaptation.
- DPF maintenance
- Forced regeneration with the diagnostic tool, DPF cleaning, pressure sensor replacement.
- EGR valve and intake
- Cleaning or replacement of the EGR valve and intake manifold, followed by adaptation.
- Pre-inspection check-up
- Fault code reading and emissions system check.
- Fleets and professionals
- Diagnosis and electronic maintenance of commercial vehicles for businesses, breakdown services and hauliers.
How it works
You call
Describe the warning light or the message shown. Until 9 pm, Sundays included.
We come to you
Anywhere in Belgium, right to the vehicle.
On-site diagnostics
We read the ECUs to find the real cause.
Solution
Repair, coding or programming, then the faults are read again.
AdBlue · SCR · urea breakdown help
Vehicle breakdown repair and no-start across Belgium
"UREA no start" message, SCR fault, "check injection" or risk of engine damage? We come to your broken-down vehicle, in Brussels and anywhere in Belgium.
- My vehicle won't start because of AdBlue
- No-start caused by AdBlue: we read the SCR system faults (NOx sensor, pump, injector, urea tank) and fix the cause.
- UREA no start SCR
- "No start in … km" countdown or vehicle already blocked: on-site AdBlue diagnosis and repair.
- Check injection
- Electronic diagnosis of the injection, EGR and DPF to find the real cause of the message.
- Risk of engine damage
- Warning light or alert message: call before driving, we check the fault before it gets worse.
- AdBlue fault solution in Brussels
- Cars, vans, trucks and agricultural machinery, until 9 pm, weekends included.
Frequently asked questions
Where do you travel?
Anywhere in Belgium, right to the vehicle: Brussels and its municipalities (Anderlecht, Ixelles, Schaerbeek, Uccle, Forest, Molenbeek, Etterbeek, Evere, Jette, Woluwe…), Antwerp, Ghent, Liège, Charleroi, Namur, Mons and the rest of the country.
What are your hours?
Until 9 pm, weekends included, Sundays too. Call 0485 38 25 36 or write on WhatsApp.
Which vehicles do you work on?
Cars, vans, heavy goods vehicles and trucks, agricultural machinery, construction machinery and motorcycles, all makes. Private customers and professionals alike.
Can you clone an engine (ECU) or gearbox (TCU) control unit?
Yes: Bosch EDC17, MD1, MG1, DSG 7 DQ381 and ZF 8HP gearboxes and other references, via the OBD port or on the bench. Send the control unit reference for a faster answer.
How much do you gain with a Stage 1 remap?
No gain is announced in advance: it depends on the vehicle, the engine and its condition. The original file is read and backed up before any calibration.
AdBlue warning “No start in … km”: what should you do?
Call before the vehicle locks up. We read the fault (sensor, pump, injector or urea tank) and fix the cause, on site.
How long does it take to clone a module?
Depending on the module, it is ready within 24 hours in Brussels: BMW and MINI FRM, Mercedes EZS/EIS, Audi steering column lock.
Another question? The answer is just a phone call away.
Quote request
The more precise the request (ECU reference, fault code), the faster the answer.
A warning light, a message, a breakdown? Call us.
Available until 9 pm, weekends too. We travel anywhere in Belgium.


